Quick detail of RFID Reader UHF:
-
Communication mode:Modbus RS232;
Support Standard:ISO18000-6C,EPC C1G2;
Waterproof/ dustproof:IP67;
Fixed type:4*M4 screw;
Communication Interface:M12A(4pin M) + M12A(5pin M) ;
Specification of RFID Reader UHF:
| Specification | |
| Support Standard | ISO18000-6C,EPC C1G2 |
| Operating Frequency | 860~960MHz |
| Reading Range | 0-3m |
| Communication mode | Modbus RS232 |
| Communication rate | 9600~115200 bit/s |
| Power Supply | 24V DC(9-30V) |
| Current | <0.38A@24V DC |
| Physical parameters | |
| Dimension | 100*100*35mm |
| Weight | 160g |
| Fixed type | 4*M4 screw |
| Housing Material | ABS and Metal plate |
| Color | Black |
| Indicator light | LED*2 |
| Interface | M12A(4pin M) + M12A(5pin M) |
| Application environment | |
| Working Temperature | -40℃～+85℃ |
| Humidity | 5%～95%RH |
| Waterproof/dustproof | IP67 |
Feature of RFID Reader UHF:
Efficient RFID identification solutions for process optimization, help improve tool recognition and complete traceability of production and logistics processes.
RFID Reader UHF Application:
Power Battery Assembly
Install the reader at the RFID collection point, and the on-line station collection point reads the RFID tag in the material box to obtain the information of slots in the material box (each slot is equipped with a cell with different voltage), The voltage value/grade of the test cell is written into the material box RFID tag at the test station of the voltage cell. When the cell is classified, read the RFID tag information of the material box and connect the robot in real time to automaticaly put the cell into the corresponding cell transport track. After the robot takes down the cell with different gear from the transport track and puts them into the same material box it will write the cell gear information into the RFID tag of the material box. Through the operation of each station on the RFID tag, a series of processes such as cell division, transportation, encapsulation, and assembly are completed in the process of cell assembly.
Intelligent Application of Home Appliance Manufacturing Process
Through RFID data acquisition technology (By adding RFID tags on the product/tooling board and deploying RFID readers on the workstation),the unmanned,automatic and real-time identification of single-item products on the production line is realized.
Using real-time collected product information,complete error prevention of mixed flow production materials,real-time push of process guidance,automatic diversion of defective products,automatic generation of quality reports,product traceability management,mixed flow line alarms,and equipment automation docking.
The production management system is an information system that combines RFID products to obtain real time data on each workstation and upload it to the server, to facilitate data analysis, improving the transparency and controllability of enterprise production site, thus to realize high efficiency and ROI.
Dimension Drawing(mm):
Installation Instruction:
This reader use four M4 screws to fixing. According to the installation environment of the site,we can support bracket to install.If there has Metal plate beside the product,please make sure that the distance between reader and Metal plate has more than 15mm,or it will influence the performance of reading and writing.
When there are more than two readers to be installed, the distance between the readers needs to be greater than 10m.
Product Tags:
|
|
Modbus RS232 Interface 860~960mhz ISO18000-6C Industrial RFID Reader UHF Long Range Reader Writer Images
|
